Dantes Lucifer: The Denial of the Word :: The Divine Comedy

The four words constituting the first line of Inferno 34, however, are and are not Virgil's own words. On the most obvious level, these words are his own in that the text attributes them to him. At the same time, they are not his, since they are a quotation of the first line of a hymn by Venantius Fortunatus.3 And yet, the last word, inferni, must be attributed to Virgil under all respects, for he utters it without borrowing it from the hymn that Venantius Fortunatus wrote in honor of the cross and Christ. Through Virgil, Dante the auctor, therefore, rewrites and parodies this sacred hymn at the conclusion of the infernal cantica exactly when the two wayfarers approach Lucifer.4 Although neither name is mentioned, both are conjured up. Inferno 34 thus begins by invoking a contrastive binomial, Christ and Lucifer. The irony inherent in the Christian hymn's adaptation for the purpose of announcing Lucifer's appearance to the Pilgrim stems, most strikingly, from subverting a text written for a sacred purpose and now employing it for a profane one.5 No longer the sacred poem ( «Vexilla regis prodeunt ») written by a Christian poet, the new and profane poem ( «Vexilla regis prodeunt inferni ») is proclaimed by a pagan, is dedicated, as it were, to Lucifer, and is inscribed within the book of the Commedia. Whereas the Christian Venantius writes a poem to his king, Christ, the pagan Virgil, unable to write a poem for the king whose law he opposed (Inf. 1:125), intones a poem to his de facto king, Lucifer, and he does so by borrowing and perverting a sacred text. In fine, Dante the auctor records this new hymn to Lucifer in his text, as if he were the scribe of Virgil the poet. This opposition between Christ and Lucifer is further emphasized by another textual element, which focuses on nomen. The Inferno, in fact, is the text where the word Dite __ Lucifer __ is inscribed and where the word Christ is never recorded. Thus a written sign characterizes Lucifer in the first cantica, whereas the text's silence typifies Christ. As we shall see, however, the meaning of this verbal presence and absence is ultimately turned around: Lucifer's presence becomes a failure, whereas Christ's absence signifies a victory. As a sign of his textual presence throughout the first cantica, Lucifer, the character whom the Pilgrim contemplates in the nethermost pit of the universe, is designated by means of various words and circumlocutions.

Cost Accounting Answers

CHAPTER 4 JOB COSTING 4-1Cost pool––a grouping of individual indirect cost items. Cost tracing––the assigning of direct costs to the chosen cost object. Cost allocation––the assigning of indirect costs to the chosen cost object. Cost-allocation base––a factor that links in a systematic way an indirect cost or group of indirect costs to cost objects. 4-2In a job-costing system, costs are assigned to a distinct unit, batch, or lot of a product or service.In a process-costing system, the cost of a product or service is obtained by using broad averages to assign costs to masses of identical or similar units. 4-3An advertising campaign for Pepsi is likely to be very specific to that individual client. Job costing enables all the specific aspects of each job to be identified. In contrast, the processing of checking account withdrawals is similar for many customers. Here, process costing can be used to compute the cost of each checking account withdrawal. -4The seven steps in job costing are: (1) identify the job that is the chosen cost object, (2) identify the direct costs of the job, (3) select the cost-allocation bases to use for allocating indirect costs to the job, (4) identify the indirect costs associated with each cost-allocation base, (5) compute the rate per unit of each cost-allocation base used to allocate indirect costs to the job, (6) compute the indirect costs allocated to the job, and (7) compute the total cost of the job by adding all direct and indirect costs assigned to the job. -5Major cost objects that managers focus on in companies using job costing are a product such as a specialized machine, a service such as a repair job, a project such as running the Expo, or a task such as an advertising campaign. 4-6Three major source documents used in job-costing systems are (1) job cost ecord or job cost sheet, a document that records and accumulates all costs assigned to a specific job, starting whe n work begins (2) materials requisition record, a document that contains information about the cost of direct materials used on a specific job and in a specific department; and (3) labor-time sheet, a document that contains information about the amount of labor time used for a specific job in a specific department. -7The main advantages of using computerized source documents for job cost records are the accuracy of the records and the ability to provide managers with instantaneous feedback to help control job costs. 4-8Two reasons for using an annual budget period are a. The numerator reason––the longer the time period, the less the influence of seasonal patterns in overhead costs, and b. The denominator reason––the longer the time period, the less the effect of variations in output levels or quantities of the cost-allocation bases on the allocation of fixed costs. -9Actual costing and normal costing differ in their use of actual or budgeted indirect cost rates: | |Actual |Normal | | |Costing |Costing | |Direct-cost rates |Actual rates |Actual rates | |Indirect-cost rates |Actual rates |Budgeted rates |Each costing method uses the actual quantity of the direct-cost input and the actual quantity of the cost-allocation base. 4-10A house construction firm can use job cost information (a) to determine the profitability of individual jobs, (b) to assist in bidding on future jobs, and (c) to evaluate professionals who are in charge of managing individual jobs. 4-11The statement is false. In a normal costing system, the Manufacturing Overhead Control account will not, in general, equal the amounts in the Manufacturing Overhead Allocated account.The Manufacturing Overhead Control account aggregates the actual overhead costs incurred while Manufacturing Overhead Allocated allocates overhead costs to jobs on the basis of a budgeted rate times the actual quantity of the cost-allocation base. Underallocation or overallocation of indirect (overh ead) costs can arise because of (a) the Numerator reason––the actual overhead costs differ from the budgeted overhead costs, and (b) the Denominator reason––the actual quantity used of the allocation base differs from the budgeted quantity. 4-12Debit entries to Work-in-Process Control represent increases in work in process.Examples of debit entries under normal costing are (a) direct materials used (credit to Materials Control), (b) direct manufacturing labor billed to job (credit to Wages Payable Control), and (c) manufacturing overhead allocated to job (credit to Manufacturing Overhead Allocated). 4-13Alternative ways to make end-of-period adjustments to dispose of underallocated or overallocated overhead are as follows: (i)Proration based on the total amount of indirect costs allocated (before proration) in the ending balances of work in process, finished goods, and cost of goods sold. ii)Proration based on total ending balances (before proration) in w ork in process, finished goods, and cost of goods sold. iii) Year-end write-off to Cost of Goods Sold. iv) The adjusted allocation rate approach that restates all overhead entries using actual indirect cost rates rather than budgeted indirect cost rates. 4-14A company might use budgeted costs rather than actual costs to compute direct labor rates because it may be difficult to trace direct labor costs to jobs as they are completed (for example, because bonuses are only known at the end of the year). -15Modern technology of electronic data interchange (EDI) is helpful to managers because it ensures that a purchase order is transmitted quickly and accurately to suppliers with minimum paperwork and costs. 16. (10 min) Job order costing, process costing. a. Job costingl. Job costing b. Process costingm. Process costing c. Job costingn. Job costing d. Process costingo. Job costing e. Job costingp. Job costing f. Process costingq. Job costing g. Job costingr. Process costing h. Job costin g (but some process costing)s. Job costing i.Process costingt. Process costing j. Process costingu. Job costing k. Job costing 4-17(20 min. )Actual costing, normal costing, accounting for manufacturing overhead. 1. [pic]=[pic] =[pic]= 1. 80 or 180% [pic]=[pic] =[pic]= 1. 9 or 190% 2. Costs of Job 626 under actual and normal costing follow: ActualNormal CostingCosting Direct materials$ 40,000$ 40,000 Direct manufacturing labor costs30,00030,000 Manufacturing overhead costs $30,000 ( 1. 90; $30,000 ( 1. 80 57,000 54,000 Total manufacturing costs of Job 626$127,000$124,000 3. pic]=[pic] ( [pic] =$1,450,000 ( 1. 80 =$2,610,000 [pic]=[pic] – [pic] =$2,755,000 ( $2,610,000 = $145,000 There is no under- or overallocated overhead under actual costing because overhead is allocated under actual costing by multiplying actual manufacturing labor costs and the actual manufacturing overhead rate. This, of course equals the actual manufacturing overhead costs. All actual overhead costs are allocated to products. Hence, there is no under- or overallocated overhead. 4-18(20 -30 min. ) Job costing, normal and actual costing. 1. pic]=[pic] = [pic] =$50 per direct labor-hour [pic]=[pic] = [pic] =$40 per direct labor-hour These rates differ because both the numerator and the denominator in the two calculations are different—one based on budgeted numbers and the other based on actual numbers. |2a. |Laguna |Mission | | |Model |Model | | Normal costing | | | |Direct costs | | |Direct materials |$106,760 |$127,550 | |Direct labor |36,950 |41,320 | | |143,710 |168,870 | |Indirect costs | | | |Assembly support ($50 ( 960; $50 ( 1,050) |48,000 |52,500 | |Total costs |$191,710 |$221,370 | |2b.Actual costing | | | |Direct costs | | | |Direct materials |$106,760 |$127,550 | |Direct labor |36,950 |41,320 | | |143,710 |168,870 | |Indirect costs | | | |Assembly support ($40 ( 960; $40 ( 1,050) |38,400 |42,000 | |Total costs |$182,110 |$210,870 | 3. Normal costing enables Am esbury to report a job cost as soon as the job is completed, assuming that both the direct materials and direct labor costs are known at the time of use. Once the 960 direct labor-hours are known for the Laguna Model (June 2011), Amesbury can compute the $191,710 cost figure using normal costing. Amesbury can use this information to manage the costs of the Laguna Model job as well as to bid on similar jobs later in the year. In contrast, Amesbury has to wait until the December 2011 year-end to compute the $182,110 cost of the Laguna Model using actual costing.Although not required, the following overview diagram summarizes Amesbury Construction’s job-costing system. [pic] 4-19(10 min. )Budgeted manufacturing overhead rate, allocated manufacturing overhead. 1. Budgeted manufacturing overhead rate = [pic] = [pic] = $24 per machine-hour |2. |Manufacturing |= |Actual |( |Budgeted manufacturing | | |overhead | |machine-hours | |overhead rate | | |allocated | | | | | = 170,000 ? $2 4 = $4,080,000 3.Since manufacturing overhead allocated is greater than the actual manufacturing overhead costs, Gammaro overallocated manufacturing overhead: Manufacturing overhead allocated$4,080,000 Actual manufacturing overhead costs 4,050,000 Overallocated manufacturing overhead$ 30,000 4-20(20-30 min. )Job costing, accounting for manufacturing overhead, budgeted rates. 1. An overview of the product costing system is [pic] Budgeted manufacturing overhead divided by allocation base: Machining overhead:[pic] = $36 per machine-hour Assembly overhead:[pic] = 180% of direct manuf. labor costs 2. Machining department, 2,000 hours ( $36$72,000 Assembly department, 180% ( $15,000 27,000 Total manufacturing overhead allocated to Job 494$99,000 3.MachiningAssembly Actual manufacturing overhead$2,100,000$ 3,700,000 Manufacturing overhead allocated, $36 ( 55,000 machine-hours1,980,000— 180% ( $2,200,000 — 3,960,000 Underallocated (Overallocated)$ 120,000$ (260,000) 4-21 (20(2 5 min. ) Job costing, consulting firm. 1. Budgeted indirect-cost rate for client support can be calculated as follows: Budgeted indirect-cost rate = $13,600,000 ? $5,312,500 = 256% of professional labor costs 2. At the budgeted revenues of $21,250,000 Taylor’s operating income of $2,337,500 equals 11% of revenues. Markup rate = $21,250,000 ? $5,312,500 = 400% of direct professional labor costs 3. Budgeted costsDirect costs: Director, $198 ( 4$ 792 Partner, $101 ( 171,717 Associate, $49 ( 422,058 Assistant, $36 ( 153 5,508$10,075 Indirect costs: Consulting support, 256% ( $10,075 25,792 Total costs$35,867 As calculated in requirement 2, the bid price to earn an 11% income-to-revenue margin is 400% of direct professional costs. Therefore, Taylor should bid 4 ( $10,075 = $40,300 for the Red Rooster job. Bid price to earn target operating income-to-revenue margin of 11% can also be calculated as follows: Let R = revenue to earn target income R – 0. 11R = $35,867 0. 89R = $ 35,867 R = $35,867 ? 0. 89 = $40,300 Or Direct costs $10,075 Indirect costs 25,792Operating income (0. 11 ( $40,300) 4,433 Bid price$40,300 4-22(15–20 min. )Time period used to compute indirect cost rates. 1. | |Quarter | | |1 |2 |3 |4 |Annual | |(1) Pools sold |700 |500 |150 |150 |1,500 | |(2) Direct manufacturing labor hours (0. 5 ( |350 |250 |75 |75 |750 | Row 1) | | | | | | |(3) Fixed manufacturing overhead costs |$10,500 |$10,500 |$10,500 |$10,500 |$42,000 | |(4) Budgeted fixed manufacturing overhead |$30 |$42 |$140 |$140 |$56 | |rate per direct manufacturing labor hour | | | | | | |($10,500 ( Row 2) | | | | | | | |Budgeted Costs Based on Quarterly | | |Manufacturing Overhead Rate | | |2nd Quarter |3rd Quarter | |Direct material costs ($7. 0 ( 500 pools; 150 pools) |$ 3,750 |$ 1,125 | |Direct manufacturing labor costs |4,000 |1,200 | |($16 ( 250 hours; 75 hours) | | | |Variable manufacturing overhead costs |3,000 |900 | |($12 ( 250 hours; 75 hours) | | | |Fixed manufac turing overhead costs | 10,500 | 10,500 | |($42 ( 250 hours; $140 ? 5 hours) | | | |Total manufacturing costs |$21,250 |$13,725 | |Divided by pools manufactured each quarter | ? 500 | ? 150 | |Manufacturing cost per pool |$ 42. 50 |$ 91. 50 | 2. | |Budgeted Costs Based on Annual Manufacturing | | |Overhead Rate | | |2nd Quarter |3rd Quarter | |Direct material costs ($7. 0 ( 500 pools; 150 pools) |$ 3,750 |$1,125 | |Direct manufacturing labor costs |4,000 |1,200 | |($16 ( 250 hours; 75 hours) | | | |Variable manufacturing overhead costs |3,000 |900 | |($12 ( 250 hours; 75 hours) | | | |Fixed manufacturing overhead costs | 14,000 | 4,200 | |($56 ( 250 hours; 75 hours) | | | |Total manufacturing costs |$24,750 |$7,425 | |Divided by pools manufactured each quarter | ( 500 | ( 150 | |Manufacturing cost per pool |$ 49. 50 |$49. 50 | 3. | |2nd Quarter |3rd Quarter | |Prices based on quarterly budgeted manufacturing overhead rates calculated in |$55. 25 |$118. 5 | |requirement 1 | | | |($42. 50 ( 130%; $91. 50 ( 130%) | | | |Price based on annual budgeted manufacturing overhead rates calculated in |$64. 35 |$64. 35 | |requirement 2 | | | |($49. 50 ( 130%; $49. 50 ( 130%) | | |Splash should use the budgeted annual manufacturing overhead rate because capacity decisions are based on longer annual periods rather than quarterly periods. Prices should not vary based on quarterly fluctuations in production. Splash could vary prices based on market conditions and demand for its pools. In this case, Splash would charge higher prices in quarter 2 when demand for its pools is high. Pricing based on quarterly budgets would cause Splash to do the opposite—to decrease rather than increase prices! 4-23(10–15 min. ) Accounting for manufacturing overhead. 1. Budgeted manufacturing overhead rate= [pic] = $30 per machine-hour 2. Work-in-Process Control7,350,000 Manufacturing Overhead Allocated7,350,000 (245,000 machine-hours ( $30 per machine-hour = $7,350,000) 3. 7,350,000– $7,300,000 = $50,000 overallocated, an insignificant amount of actual manufacturing overhead costs $50,000 ? $7,300,000 = 0. 68%. Manufacturing Overhead Allocated7,350,000 Manufacturing Department Overhead Control7,300,000 Cost of Goods Sold50,000 4-24(35(45 min. ) Job costing, journal entries. Some instructors may also want to assign Exercise 4-25. It demonstrates the relationships of the general ledger to the underlying subsidiary ledgers and source documents. 1. An overview of the product costing system is: 2. & 3. This answer assumes COGS given of $4,020 does not include the writeoff of overallocated manufacturing overhead. |2. (1) Materials Control |800 | | | |Accounts Payable Control | |800 | | |(2) Work-in-Process Control |710 | | | |Materials Control | |710 | | |(3) Manufacturing Overhead Control |100 | | | |Materials Control | |100 | | |(4) Work-in-Process Control |1,300 | | | |Manufacturing Overhead Control |900 | | | |Wages Payable Control | |2,200 | | |(5) Manufacturing Overhead Control | 400 | | | |Accumulated Depreciation––buildings and | | | | |manufacturing equipment | |400 | | |(6) Manufacturing Overhead Control | 550 | | | |Miscellaneous accounts | |550 | | |(7) Work-in-Process Control |2,080 | | | |Manufacturing Overhead Allocated | |2,080 | | |(1. 60 ( $1,300 = $2,080) | | | | |(8) Finished Goods Control |4,120 | | | |Work-in-Process Control |4,120 | | |(9) Accounts Receivable Control (or Cash) |8,000 | | | |Revenues | |8,000 | | |(10) Cost of Goods Sold |4,020 | | | |Finished Goods Control | |4,020 | | |(11) Manufacturing Overhead Allocated |2,080 | | | |Manufacturing Overhead Control | |1,950 | | |Cost of Goods Sold | |130 | 3. |Materials Control | |Bal. /1/2011 |100 |(2) Work-in-Process Control (Materials used) | | |(1) Accounts Payable Control | |(3) Manufacturing Overhead Control (Materials |710 | |(Purchases) |800 |used) | | | | | |100 | |Bal. 12/31/2011 |90 | | | |Work-in-Process Control | |B al. /1/2011 |60 |(8) Finished Goods Control (Goods completed) | | |(2) Materials Control (Direct | | |4,120 | |materials) |710 | | | |(4) Wages Payable Control (Direct | | | | |manuf. labor) | | | | |(7) Manuf. Overhead Allocated |1,300 | | | | | | | | | |2,080 | | | |Bal. 2/31/2011 |30 | | | |Finished Goods Control | |Bal. 1/1/2011 |500 |(10) Cost of Goods Sold |4,020 | |(8) WIP Control | | | | |(Goods completed) |4,120 | | | |Bal. 12/31/2011 |600 | | | Cost of Goods Sold | |(10) Finished Goods Control (Goods | |(11) Manufacturing Overhead Allocated (Adjust | | |sold) |4,020 |for overallocation) | | | | | |130 | |Bal. 12/31/2011 |3,890 | | | |Manufacturing Overhead Control | | (3) Materials Control (Indirect materials)| |(11) To close |1,950 | |(4) Wages Payable Control (Indirect manuf. |100 | | | |labor) | | | | |(5) Accum. Deprn.Control (Depreciation) |900 | | | |(6) Accounts Payable Control | | | | |(Miscellaneous) |400 | | | | | | | | | |550 | | | |Bal. |0 | | | Manufacturing Overhead Allocated | |(11) To close |2,080 |(7) Work-in-Process Control (Manuf. overhead | | | | |allocated) |2,080 | | | |Bal. | 0 | 4-25(35 minutes) Journal entries, T-accounts, and source documents. 1. i. Direct Materials Control 124,000 Accounts Payable Control124,000 Source Document: Purchase Invoice, Receiving Report Subsidiary Ledger: Direct Materials Record, Accounts Payable ii. Work in Process Control a 122,000 Direct Materials Control122,000Source Document: Material Requisition Records, Job Cost Record Subsidiary Ledger: Direct Materials Record, Work-in-Process Inventory Records by Jobs iii. Work in Process Control80,000 Manufacturing Overhead Control54,500 Wages Payable Control134,500 Source Document: Labor Time Sheets, Job Cost Records Subsidiary Ledger:, Manufacturing Overhead Records, Employee Labor Records, Work-in-Process Inventory Records by Jobs iv. Manufacturing Overhead Control129,500 Salaries Payable Control 20,000 Accounts Payable Control 9,500 Accumulated Depreciation Control 30,000 Rent Payable Control 70,000 Source Document: Depreciation Schedule, Rent Schedule, Maintenance wages due, Invoices for miscellaneous factory overhead items Subsidiary Ledger: Manufacturing Overhead Records v.Work in Process Control200,000 Manufacturing Overhead Allocated200,000 ($80,000 [pic] $2. 50) Source Document: Labor Time Sheets, Job Cost Record Subsidiary Ledger: Work-in-Process Inventory Records by Jobs vi. Finished Goods Control b387,000 Work in Process Control387,000 Source Document: Job Cost Record, Completed Job Cost Record Subsidiary Ledger: Work-in-Process Inventory Records by Jobs, Finished Goods Inventory Records by Jobs vii. Cost of Goods Sold c432,000 Finished Goods Control432,000 Source Document: Sales Invoice, Completed Job Cost Record Subsidiary Ledger: Finished Goods Inventory Records by Jobs viii. Manufacturing Overhead Allocated200,000Manufacturing Overhead Control ($129,500 + $54,500)184,000 Cost of Goods Sold 16,000 Source Document: Prior Journal Entries ix. Administrative Expenses 7,000 Marketing Expenses120,000 Salaries Payable Control30,000 Accounts Payable Control90,000 Accumulated Depreciation, Office Equipment 7,000 Source Document: Depreciation Schedule, Marketing Payroll Request, Invoice for Advertising, Sales Commission Schedule. Subsidiary Ledger: Employee Salary Records, Administration Cost Records, Marketing Cost Records. aMaterials used = [pic] + Purchases – [pic] [pic] b[pic] = [pic] + [pic] – [pic] [pic] cCost of goods sold = [pic] + [pic] – [pic] [pic] 2. T-accounts Direct Materials Control | |Bal. 1/1/2011 |9,000 |(2) Work-in-Process Control (Materials used) | | |(1) Accounts Payable Control (Purchases) | | |122,000 | | |124,000 | | | |Bal. 12/31/2011 |11,000 | | | Work-in-Process Control | |Bal. 1/1/2011 |6,000 |(6) Finished Goods Control (Cost of goods | | |(2) Materials Control | |manufactured) | | |(Direct materials used) |122,000 | |387,000 | |(3) Wages Payable Control (Direct manuf. labor)| | | | |(5) Manuf.Overhead Allocated |80,000 | | | | | | | | | |200,000 | | | |Bal. 12/31/2011 |21,000 | | | |Finished Goods Control | |Bal. 1/1/2011 |69,000 |(7) Cost of Goods Sold |432,000 | |(6) WIP Control | | | | |(Cost of goods manuf. ) |387,000 | | | |Bal. 2/31/2011 |24,000 | | | |Cost of Goods Sold | |(7) Finished Goods Control (Goods sold) | |(8) Manufacturing Overhead Allocated (Adjust | | | |432,000 |for overallocation) | | | | | |16,000 | | | | | | Manufacturing Overhead Control | |(3) Wages Payable Control | |(8) To close |184,000 | |(Indirect manuf. labor) |54,500 | | | |(4) Salaries Payable Control (Maintenance) | | | | |(4) Accounts Payable Control (Miscellaneous) |20,000 | | | |(4) Accum. Deprn.Control (Depreciation) | | | | |(4) Rent Payable Control (Rent) |9,500 | | | | | | | | | |30,000 | | | | | | | | | |70,000 | | | |Bal. |0 | | | |Manufacturing Overhead Allocated | |(8) To close |200,000 |(5) Work-in-Process Contr ol (Manuf. verhead | | | | |allocated) | | | | | |200,000 | | | |Bal. | 0 | 4-26(45 min. )Job costing, journal entries. Some instructors may wish to assign Problem 4-24. It demonstrates the relationships of journal entries, general ledger, subsidiary ledgers, and source documents. 1. An overview of the product-costing system is 2. Amounts in millions. (1) Materials Control |150 | | |Accounts Payable Control | |150 | |(2) Work-in-Process Control |145 | | |Materials Control | |145 | |(3) Manufacturing Department Overhead Control | 10 | | |Materials Control | |10 | |(4) Work-in-Process Control | 90 | | |Wages Payable Control | |90 | |(5) Manufacturing Department Overhead Control | 30 | | |Wages Payable Control | |30 | |(6) Manufacturing Department Overhead Control | 19 | | |Accumulated Depreciation | |19 | |(7) Manufacturing Department Overhead Control | 9 | | |Various liabilities | |9 | |(8) Work-in-Process Control | 63 | | |Manufacturing Overhead Allocated | |63 | |(9) Finished Goods Control |294 | | |Work-in-Process Control | |294 | |(10a)Cost of Goods Sold |292 | | |Finished Goods Control | |292 | |(10b) Accounts Receivable Control (or Cash ) |400 | | |Revenues | |400 | The posting of entries to T-accounts is as follows: |Materials Control | |Work-in-Process Control | |Bal 12 |(2) 145 | |Bal. |(9) 294 | | | | |(2) 145 | | | | | |(4) 90 | | | | | |(8) 63 | | |(1) 150 |(3) 10 | | | | |Bal. 7 | | | | | | | | | | | | | | |Bal. | | |Finished Goods Control | |Cost of Goods Sold | |Bal. 6 |(10a) 292 | |(10a) 292 | | |(9) 294 | | |(11) 5 | | |Bal. 8 | | | | | |Manufacturing Department | | |Overhead Control | |Manufacturing Overhead Allocated | |(3) 10 |(11) 68 | |(11) 63 |(8) 63 | |(5) 30 | | | | | |(6) 19 | | | | | |(7) 9 | | | | | Accounts Payable Control | |Wages Payable Control | | |(1) 150 | | |(4) 90 | | | | | |(5) 30 | |Accumulated Depreciation | |Various Liabilities | | |(6) 19 | | |(7) 9 | Accounts Receivable Control | |Revenues | |(10b) 400 | | | | (10b) 400 | | | | | | | The ending balance of Work-in-Process Control is $6. 3. (11) Manufacturing Overhead Allocated63 Cost of Goods Sold5 Manufacturing Department Overhead Control68 Entry posted to T-accounts in Requirement 2. 4-27(15 min. )Job costing, unit cost, ending work in progress. 1. Direct manufacturing labor rate per hour |$26 |   | |Manufacturing overhead cost allocated |$20 |   | |per manufacturing labor-hour | | | |   |Job M1 |Job M2 | |Direct manufacturing labor costs |$273,000 |$208,000 | |Direct manufacturing labor hours ($273,000[pic]$26; | 10,500 | 8,000 | |$208,000[pic]$26) | | | |Manufacturing overhead cost allocated (10,500 [pic] $20; |$210,000 |$160,000 | |8,000 [pic] $20) | | | | | | | |Job Costs May 2011 |Job M1 |Job M2 | |Direct materials |$ 78,000 |$ 51,000 | |Direct manufacturing labor | 273,000 | 208,000 | |Manufacturing overhead allocated | 210,000 | 160,000 | |Total costs |$561,000 |$419,000 | 2. |Number of pipes produced for Job M1 |1,100 |   | |Cost per pipe ($561,000 [pic]1,100) |$510 |   | 3. Finished Goods Control561,000 Work-in-Process Control 561,000 4.Rafael Company began May 2011 with no work-in-process inventory. During May, it started and finished M1. It also started M2, which is still in work-in-process inventory at the end of May. M2’s manufacturing costs up to this point, $419,000, remain as a debit balance in the Work-in-Process Inventory account at the end of May 2011. 4-28(20(30 min. ) Job costing; actual, normal, and variation from normal costing. 1. Actual direct cost rate for professional labor=$59 per professional labor-hour Actual indirect cost rate = [pic]=$42 per professional labor-hour [pic] = [pic]=$55 per professional labor-hour Budgeted indirect cost rate = [pic]=$43 per professional labor-hour |(a) |(b) |(c) | | |Actual |Normal |Variation of | | |Costing |Costing |Normal Costing | |Direct-Cost Rate |$59 |$59 |$55 | | |(Actual rate) |(Actual rate) |(Budgeted rate) | |Indirect-Cost Ra te |$42 |$43 |$43 | | |(Actual rate) |(Budgeted rate) |(Budgeted rate) | |2. |(a) |(b) |(c) | | Actual |Normal |Variation of | | |Costing |Costing |Normal Costing | |Direct Costs |$59 ( 160 = $ 9,440 |$59 ( 160 = $ 9,440 |$55 ( 160 = $ 8,800 | |Indirect Costs |$42 ( 160 = 6,720 |$43 ( 160 = 6,880 |$43 ( 160 = 6,880 | |Total Job Costs |$16,160 |$16,320 |$15,680 | All three costing systems use the actual professional labor time of 160 hours. The budgeted 150 hours for the Pierre Enterprises audit job is not used in job costing. However, Chico may have used the 150 hour number in bidding for the audit. The actual costing figure of $16,160 is less than the normal costing figure of $16,320 because the actual indirect-cost rate ($42) is less than the budgeted indirect-cost rate ($43).The normal costing figure of $16,320 is more than the variation of normal costing (based on budgeted rates for direct costs) figure of $15,680, because the actual direct-cost rate ($59) is more than the budge ted direct-cost rate ($55). Although not required, the following overview diagram summarizes Chico’s job-costing system. [pic] 4-29(20(30 min. ) Job costing; actual, normal, and variation from normal costing. 1. Actual direct cost rate for architectural labor=$92 per architectural labor-hour Actual indirect cost rate = [pic]=$50 per architectural labor-hour [pic] = [pic]=$90 per architectural labor-hour Budgeted indirect cost rate = [pic]=$54 per architectural labor-hour |(a) |(b) |(c) | | |Actual |Normal |Variation of | | |Costing |Costing |Normal Costing | |Direct-Cost Rate |$92 |$92 |$90 | | |(Actual rate) |(Actual rate) |(Budgeted rate) | |Indirect-Cost Rate |$50 |$54 |$54 | | |(Actual rate) |(Budgeted rate) |(Budgeted rate) | |2. (a) |(b) |(c) | | |Actual |Normal |Variation of | | |Costing |Costing |Normal Costing | |Direct Costs |$92 ( 250 = $23,000 |$92 ( 250 = $23,000 |$90 ( 250 = $22,500 | |Indirect Costs |$50 ( 250 = 12,500 |$54 ( 250 = 13,500 |$54 ( 250 = 13,500 | |Total Job Costs |$35,500 |$36,500 |$36,000 | All three costing systems use the actual architectural labor time of 250 hours. The budgeted 275 hours for the Champ Tower job is not used in job costing. However, Braden Brothers may have used the budgeted number of hours in bidding for the job. 30. (30 min. ) Proration of overhead. [pic] = [pic] [pic] 2. Overhead allocated = 50% [pic] Actual direct manufacturing labor cost = 50% [pic] $228,000 = $114,000 |Underallocated |= |Actual |– |Allocated plant | | | |manufacturing | |manufacturing | |overhead costs | | | |overhead | |overhead costs | | | | = $117,000 – $114,000 = $3,000 Underallocated manufacturing overhead = $3,000 3a. All underallocated manufacturing overhead is written off to cost of goods sold. Both work in process (WIP) and finished goods inventory remain unchanged. |Account |Dec. 31, 2011 |Proration of $3,000 |Dec. 31, 2011 | | |Balance |Underallocated |Balance | | |(Before Proration) |Manuf.Overhead |(After Proration) | | |(1) |(2) |(3) = (1) + (2) | |WIP |$ 50,700 |$ 0 |$ 50,700 | |Finished Goods |245,050 |0 |245,050 | |Cost of Goods Sold | 549,250 | 3,000 | 552,250 | |Total |$845,000 |$3,000 |$848,000 | 3b. Underallocated manufacturing overhead prorated based on ending balances: |Account |Dec. 31, 2011 Account |Account |Proration of $3,000 |Dec. 1, 2011 Account | | |Balance |Balance as a |Underallocated |Balance | | |(Before Proration) |Percent of Total |Manuf. Overhead |(After Proration) | | |(1) |(2) = (1) ? $845,000 |(3) = (2)[pic]$3,000 |(4) = (1) + (3) | |WIP |$ 50,700 |0. 06 |0. 06 [pic] $3,000 = $ 180 |$ 50,880 | |Finished Goods |245,050 |0. 29 |0. 29 [pic] $3,000 = 870 |245,920 | |Cost of Goods Sold | 549,250 |0. 65 |0. 5 [pic] $3,000 = 1,950 | 551,200 | |Total |$845,000 |1. 00 |$3,000 |$848,000 | 3c. Underallocated manufacturing overhead prorated based on 2011 overhead in ending balances: |Account |Dec. 31, 2011 |Allocated Manuf. |Allocated Manuf. Overhead |Proration of $3,0 00 |Dec. 31, 2011 | | |Account |Overhead in |in |Underallocated |Account | | |Balance |Dec. 31, 2011 Balance |Dec. 31, 2011 |Manuf.Overhead |Balance | | |(Before Proration) |(Before Proration) |Balance as a |(4) = (3)[pic]$3,000 |(After Proration) | | |(1) |(2) |Percent of Total | |(5) = (1) + (4) | | | | |(3) = (2) ? $114,000 | | | |WIP |$ 50,700 |$ 10,260a |0. 09 |0. 09 [pic] $3,000 = $ 270 |$ 50,970 | |Finished Goods |245,050 |29,640b |0. 26 |0. 6 [pic] $3,000 = 780 |245,830 | |Cost of Goods Sold | 549,250 | 74,100c |0. 65 |0. 65 [pic] $3,000 = 1,950 | 551,200 | |Total | $845,000 |$114,000 |1. 00 | $3,000 | $848,000 | a,b,c Overhead allocated = Direct manuf. labor cost[pic]50% = $20,520; $59,280; $148,200[pic]50% 4. Writing off all of the underallocated manufacturing overhead to Cost of Goods Sold (CGS) is usually warranted when CGS is large relative to Work-in-Process and Finished Goods Inventory and the underallocated manufacturing overhead is immaterial. Both these conditions apply in this case.ROW should write off the $3,000 underallocated manufacturing overhead to Cost of Goods Sold Account. 4-31 (20(30 min)Job costing, accounting for manufacturing overhead, budgeted rates. 1. An overview of the job-costing system is: [pic] 2. Budgeted manufacturing overhead divided by allocation base: a. Machining Department: [pic]= $52 per machine-hour b. Finishing Department: [pic]= 194% of direct manufacturing labor costs 3. Machining Department overhead, $52 ( 130 machine-hours$6,760 Finishing Department overhead, 194% of $1,100 2,134 Total manufacturing overhead allocated$8,894 4. Total costs of Job 431: Direct costs: Direct materials––Machining Department$15,500 ––Finishing Department5,000Direct manufacturing labor—Machining Department400 —Finishing Department 1,100$22,000 Indirect costs: Machining Department overhead, $52 ( 130$ 6,760 Finishing Department overhead, 194% of $1,100 2,134 8,894 Total costs$30,894 The per-u nit product cost of Job 431 is $30,894 ? 400 units = $77. 235 per unit The point of this part is (a) to get the definitions straight and (b) to underscore that overhead is allocated by multiplying the actual amount of the allocation base by the budgeted rate. 5. MachiningFinishing Manufacturing overhead incurred (actual)$11,070,000$8,236,000 Manufacturing overhead allocated 210,000 hours ( $5210,920,000 94% of $4,400,000 8,536,000 Underallocated manufacturing overhead$ 150,000 Overallocated manufacturing overhead$ 300,000 Total overallocated overhead = $300,000 – $150,000 = $150,000 6. A homogeneous cost pool is one where all costs have the same or a similar cause-and-effect or benefits-received relationship with the cost-allocation base. Fasano likely assumes that all its manufacturing overhead cost items are not homogeneous. Specifically, those in the Machining Department have a cause-and-effect relationship with machine-hours, while those in the Finishing Department have a cause-and-effect relationship with direct manufacturing labor costs.Fasano believes that the benefits of using two cost pools (more accurate product costs and better ability to manage costs) exceeds the costs of implementing a more complex system. 4-32(15(20 min. ) Service industry, job costing, law firm. 1. [pic] 2. [pic]= [pic] =[pic] =$65 per professional labor-hour Note that the budgeted professional labor-hour direct-cost rate can also be calculated by dividing total budgeted professional labor costs of $2,600,000 ($104,000 per professional ( 25 professionals) by total budgeted professional labor-hours of 40,000 (1,600 hours per professional ( 25 professionals), $2,600,000 ( 40,000 = $65 per professional labor-hour. [pic][pic]= [pic] [pic] =[pic] =$55 per professional labor-hour |4. |Richardson |Punch | |Direct costs: | | | |Professional labor, $65 ( 100; $65 ( 150 |$ 6,500 |$ 9,750 | |Indirect costs: | | | |Legal support, $55 ( 100; $55 ( 150 |5,500 |8,250 | | |$12,000 |$18, 000 | 4-33(25–30 min. Service industry, job costing, two direct- and indirect-cost categories, law firm (continuation of 4-32). Although not required, the following overview diagram is helpful to understand Keating’s job-costing system. [pic] |1. |Professional |Professional | | |Partner Labor |Associate Labor | |Budgeted compensation per professional |$ 200,000 |$80,000 | |Divided by budgeted hours of billable | | | |time per professional |? 1,600 |? ,600 | |Budgeted direct-cost rate |$125 per hour* |$50 per hour†  | *Can also be calculated as [pic]= [pic]= [pic]=$125 † Can also be calculated as [pic]= [pic]= [pic]=$ 50 |2. |General |Secretarial | | |Support |Support | |Budgeted total costs |$1,800,000 |$400,000 | |Divided by budgeted quantity of allocation base |? 40,000 hours |? ,000 hours | |Budgeted indirect cost rate |$45 per hour |$50 per hour | |3. |Richardson |Punch | |Direct costs: | | | |Professional partners, | | | |$125 ( 60 hr. ; $125 ( 30 hr. |$7,500 |$3,750 | |Professional associates, | | | |$50 ( 40 hr. ; $50 ( 120 hr. 2,000 |6,000 | |Direct costs |$ 9,500 |$ 9,750 | |Indirect costs: | | | |General support, | | | |$45 ( 100 hr. ; $45 ( 150 hr. |4,500 |6,750 | |Secretarial support, | | | |$50 ( 60 hr. ; $50 ( 30 hr. 3,000 |1,500 | |Indirect costs |7,500 |8,250 | |Total costs |$17,000 |$18,000 | |4. |Richardson |Punch | |Single direct – Single indirect | | | |(from Problem 4-32) |$12,000 |$18,000 |Multiple direct – Multiple indirect | | | |(from requirement 3 of Problem 4-33) |17,000 |18,000 | |Difference |$ 5,000 |$ 0 | | |undercosted |no change | The Richardson and Punch jobs differ in their use of resources. The Richardson job has a mix of 60% partners and 40% associates, while Punch has a mix of 20% partners and 80% associates. Thus, the Richardson job is a relatively high user of the more costly partner-related resources (both direct partner costs and indirect partner secretarial support). The Pun ch job, on the other hand, has a mix of partner and associate-related hours (1  :  4) that exactly equals the mix of partner and associate hours for the firm as a whole. The refined-costing system in Problem 4-33 increases the reported cost in Problem 4-32 for the Richardson job by 41. % (from $12,000 to $17,000) while it happens to correctly cost the Punch job. 4-34(20(25 min. ) Proration of overhead. [pic] 2. [pic]=[pic] – [pic] =$4,900,000 – $4,500,000* =$400,000 *$60 ( 75,000 actual machine-hours = $4,500,000 a. Write-off to Cost of Goods Sold | |Dec. 31, 2011 |Write-off |Dec. 31, 2011 | | |Account |of $400,000 |Account | | |Balance |Underallocated |Balance | |Account |(Before Proration) |Manufacturing (After Proration) | |(1) |(2) |Overhead |(4) = (2) + (3) | | | |(3) | | | | | | | |Work in Process |$ 750,000 |$ 0 |$ 750,000 | |Finished Goods |1,250,000 |0 |1,250,000 | |Cost of Goods Sold |8,000,000 |400,000 |8,400,000

Korean Adoptees As Asian Americans - 1799 Words

Transnational Korean Adoptions: Racialization of Korean Adoptees as Asian Americans The practice of Korean transnational adoption has a history of more than fifty years that includes multiple layers that overlap. One history is specific to the end and aftermath of the Korean War and another is the history of racialization of Korean adoptees as Asian Americans, and as a part of an ongoing history of American transracial adoption. This paper will address the history of racialization of Korean adoptees and the way they are viewed as a commodity. In the first section of this paper, I will explain the history behind transnational Korean adoption and in the second part of the paper; I will go into detail of how they were treated as a commodity,†¦show more content†¦The cultural role of the Korean American adoptee was largely established during the 1950s and 1960s as a result of media attention given to this small group of Korean immigrants who arrived in the United States when alm ost all other Asian nationals were barred from legal American immigration. During this time, the U.S. was governed by a strict policy of Asian exclusion that had been in effect in some form since 1882. So, even the trope of the Korean adoptees as â€Å"exceptional† among American peoples of color and among immigrants began with this small group of adoptees, who are now the elders of Korean adoptee communities in the United States and throughout the world. The transnational adoption program that began between the United States and South Korea in 1953 was a direct response to the consequences of American actions in Korea. It included the deployment of troops to the Korean peninsula and the limited occupation of South Korea by American troops that has continued to present day. War orphans, the first adoptees, were configured as â€Å"refugees† from war and as unfortunates who carried the stigma of mixed-race parentage, since many were the offspring of Korean mothers and American G.I. fathers. During this time, being such (mixed raced) was a socially unacceptable situation in Korea in the post-war period. Like the war itself, the practice of transnational adoption was in large, part of a

Changes in Fashion During the 1980s - 521 Words

The 1980 brought the art of being serious grown-up and working, careful makeup and colorful clothes the good the bad and the ugly. Some fashion abandoned history while others bloomed from it; the outlook was original and easygoing with velvet knickers and short cheerleader skirts. Bright colors and huge earrings were an obligation, teased hair, loud makeup were significant parts of the styles. His and her Rolex watches were the defining symbol of the yuppie couple. Short skirts, wide shoulders, and assertive lines linked all of these classic eighties designs for day and night. On the ski slopes the styles and colors of ski pants changed each season and ski boots themselves became more intricate every year. Leotards became high fashion sports had become more about style then game, Sneakers moved from fields to the place of working women. So did power dressing which main basics are various sized shoulder pads, Velcro, glitzy jewelry, silk, wool and cotton and bright colored spiked heel s. Women adapted to men’s clothing for their needs, with various styles of skirt and jacket becoming standard, shoulder pads added the width to the female form and lent an air of authority. Men were concerned about their appearance and looking good. Even underwear became controversial, with debates over boxer shorts, bikini briefs, and jockey shorts. More aftershave, hair products and even makeup were sold. For men, the power suit became common, narrow pinstripes, button down collars and fourShow MoreRelatedEssay on The Evolution of the 1960s and 1980s: Jimi Hendrix1091 Words   |  5 Pagesinfluenced this decade. In the 1980’s, there were also many influential musicians, singers, and songwriters that captivated the thoughts and movements of many people. Music influenced fashion and behavior in the 1960’s and 1980’s and these properties have been recognized throughout the years. Music went through an immense evolution in both of these decades. The fashi on and behavior that derived from music inspirations defined these two decades as individuals. The 1960’s and 1980’s have differences thatRead MoreHollywood Movies And Fashion Essay1405 Words   |  6 Pagesthe capacity to make not just a star of its leading women, but a fashion icon too. From Audrey Hepburn and Grace Kelly to Julia Roberts and Keira Knightley, via Mia Farrow and Catherine Deneuve, some of Hollywood s most successful stars owe a lot to their on-screen style. Moreover, during the 21st century, movies have been a powerful media in which to influence people’s style.   Movies gave society a great way to see vintage fashion, including how to wear period accessories that accompany the clothingRead MoreHow The Silver Screen Affects Women s Fashion Trends?1495 Words   |  6 PagesHow the Silver Screen Affects Women’s Fashion Trends? Today/Throughout History? Silver screen has the capacity to make not just a star of its leading women, but a fashion icon too. From Audrey Hepburn and Grace Kelly to Julia Roberts and Keira Knightley, via Mia Farrow and Catherine Deneuve, some of Hollywood s most successful stars owe a lot to their on-screen style. Moreover, during the 21st century, movies have been a powerful media in which to influence people’s style.   MoviesRead MoreMusic Has Impacted Our World1585 Words   |  7 Pagescultural revolution. During these times, we could see how many artists aimed at these concerns through their lyrics, but the eighties had a big impact in our society. During this decade, The United States felt more liberalistic, and New ideologies were presented to our society, also Sex and drugs became the focus of many of the lyrics expressed by the artists. The eighties were a different decade. People in The United States felt free to achieve anything that they would wanted to. The 1980s reflected theRead MoreMtv : The Decade Of Fashion1513 Words   |  7 Pages The Decade of Fashion Through TV influences people’s fashion, style, and makeup has slowly transformed from bright and bold to neutral tones over the years. Cable television became more accessible in the 1980s and by the middle of the decade 70 percent of the American population has a Cable Television that inspired people to follow popular TV shows’ fashion (Alexander). Dynasty came out as one of the most watched soap operas at the time and people began stealing fashion and makeup ideas from theRead More1950s Fashion Essay1059 Words   |  5 PagesFashion for women has become a major part of all decades and has changed constantly from day one. From one decade to another the trends and styles of clothes alternated drastically. The 1950’s started with long, flowy dresses. 1960’s moved to more playful, knee-length dresses. 1970’s was tight fitting clothes and platform shoes. 1980’s was all about bright colors. 1990’s included thrift shop clothes and more of a hip-hop style. Lastly, the 2000’s is all about short skirts and movie orientated clothesRead MorePolitics And Popular Culture During T he 1960s1279 Words   |  6 Pagesdiscovery and learning, the 1980s fought conformity and became a force to be reckoned with. It was now acceptable to express one’s individuality and the time to experiment until a person found out exactly who they were. America in the 1980s was inclined to challenge authority and tradition, as the people were vibing with attitude and vivid thoughts. This newly found confidence was introduce with the electron of Ronald Reagan, generating both social and economic change. Reagan’s restoration of theRead MoreThe Many Changes of Fashion Essay1557 Words   |  7 PagesWhat is Fashion? Fashion is a general term used to describe a style of clothing or practice used by people around the world. Fashion refers to anything that is a trend. Self-presentation is the most direct noticeable marker of fashion. Throughout history we have seen many changes in clothing, from the color, to the material used to make it. We have also seen the style in whic h clothing is made change drastically. Fashion communicates meanings that have individual and social significance. SocietyRead MoreThe Origination Of Hip Hop1237 Words   |  5 Pagescarrying the gospel of hip hop. He came of age in the South Bronx during the 1970s and used his charisma to rise to the rank of warlord in a local gang called Black Spades. After traveling to Africa, he decided to borrow a motto from an earlier decade: wage love, not war. He decided to use his influence to turn the Black Spades into a peaceful organization called the Zulu Nation. â€Å"Bambaataa had this vision of hip-hop as a force for social change,† says Chang. â€Å"He had the history and street credibility toRead MoreSocial Factors That Changed The World1366 Words   |  6 Pagesmore people are seen being involved in popular fashion trends and expressing themselves in ways they please because of the affordability. The sharply angled Vidal Sassoon hair style where women cut their hair sho rter and styled it in an angular way. This decade also started the trend of people wanting to look skinnier. Designers preferred models looked younger, thinner, and had longer legs. Social factors occurring at the time also effected fashion and helped represent people’s beliefs. Andrà © Courrà ¨ge

What You Eat Is Your Business Essay - 1140 Words

In Radley Balko’s essay â€Å"What You Eat Is Your Business,† Balko argues that what we put into our bodies is our business, not the government’s, and that personal responsibility should be primary in our nutrition choices. I agree wholeheartedly. However, while I do agree that personal responsibility is paramount, in the new age of the Affordable Care Act (which had not been implemented prior to Balko’s writing), it is becoming hard to say that the government should stay out of my business, when healthcare is now, by law, the government’s business. Critics of personal choice argue, like David Zinczenko does in his essay â€Å"Don’t Blame the Eater,†. These two authors both help me understand each other that the government must regulate the fast food industry similar to how they regulate the tobacco companies. How absurd it is that the government needs to regulate my waistline? Balko declares that government policies are â€Å"bringing government between you and your waistline† (396). While there is no doubt that there is a problem with obesity, Balko hypothesizes correctly that government programs, which are meant to halt obesity, are instead incentivizing it. In the words of Balko â€Å"If the government is paying for my anti-cholesterol medication, what incentive is there for me to put down the cheeseburger?† (397). Further, with new legislation that requires insurers to give healthcare to people regardless of pre-existing, or even self-imposed medical conditions, we have completelyShow MoreRelatedWhat You Eat Is Your Business868 Words   |  4 Pagesâ€Å"What You Eat Is Your Business,† by Radley Balko In the article of Radley Balko, he considers obesity a problem in the nation. Balko believes that it is unhealthy for children to be eating bad food but it’s their choices to eat that food. Balko is saying that if people are eating unhealthy and are having health problems everyone shouldnt have to pay for their health problems. Balko says, â€Å"In other words, bringing the government between you and your waistline.† Basically he is saying that theRead MoreWhat You Eat Is Your Business894 Words   |  4 Pagesfavorable to society as a whole. But on closer investigation, it is easily seen that the governments influence on such a personal matter produces the antithesis of beneficial and ultimately aids in nurturing obesity. In Radley Balko’s essay â€Å"What You Eat Is Your Business†, he is rightfully insists that the anti-obesity regulations and restrictions set by the government wrongfully alleviates American consumers of their individual responsibility f or their own well-being by transforming health care from aRead MoreWhat You Eat Is Your Business1315 Words   |  6 Pageseven the family of 4, finding time to eat a healthy meal fells like it can be impossible. Some might argue everyone can find time to eat a healthy meal, but as a full time college student with a family of 4 with another kid on the way. Even the little time I do have at home doesn’t change that I have not had a chance to get to the store for two weeks to buy food. Given the little time and lack of food, the options can be slim, but fast food addictions can cause you to make bad choices too. So when doesRead Moreâ€Å"What You Eat Is Your Business† reflection1000 Words   |  4 Pagesâ€Å"What You Eat Is Your Business† reflection The common thought of most Americans living in the United States that it is the greatest country on planet earth, and second is not even close. They believe this notion because of the freedoms this great nation was founded on: The freedom of religion, the freedom of speech, the freedom of assembly. These freedoms turn into more simplistic generalities that are assumed and exercised by Americans daily, such as the freedom of choice. Although the freedom ofRead MoreWhat You Eat Is Your Business By Radley Balko863 Words   |  4 Pagesor that Americans have many diseases that contribute to being obese. â€Å"What You Eat is Your Business† by Radley Balko expresses that people are at fault for making such unhealthy food choices. Others argue that the food industry is to blame for being so unhealthy. According to David Zinczenko in â€Å"Don’t Blame the Eater† he blames the fast food industry as well as the consumer. Zinczenko asks â€Å"shouldn’t we know bet ter than to eat two meals a day in fast food restaurant’s?† (392). So, who is to blameRead MoreAnalysis Of What You Eat Is Your Business By Radley Balko833 Words   |  4 Pagesâ€Å"What You Eat Is Your Business† by Radley Balko Your Are In Control It has become common today to dismiss the idea of personal responsibility, however, Radley Balko,   author of â€Å"What You Eat Is Your Business,† has not. The article, published on Monday 23, 2004,on the website Cato Institute, reminds us of the importance and significance of personal responsibility in dealing with obesity.   Additionally, he argues that   government’s   attempt to   restrict American diets and without consumers being   heldRead MoreWhat You Eat Is Your Business By Radley Balko And Junking Junk Food By Judith Warner1223 Words   |  5 PagesWhether or not a person wants a burger and french-fries’ or a salad from the salad bar, the decision should be up to him/her. Two articles share views on food, â€Å"What You Eat Is Your Business† by Radley Balko and â€Å"Junking Junk Food† by Judith Warner. These two authors wrote articles about how they felt about food and how it’s related to obesity. However, Radley Balk o would not approve of Judith Warner’s views on food for the reason that the two authors have different viewpoints on the aspect of theRead MoreWhat You Eat Is Your Business By Radley Balko And Don t Blame The Eater By David Zinczenko Essay775 Words   |  4 PagesWhen it comes to the topic of obesity, most will readily agree that it is a growing dilemma. This argument has many writers bringing different responses. Two explanations are debated in What You Eat is Your Business by Radley Balko and Don’t Blame the Eater by David Zinczenko. Both pieces create a good stance on the topic of obesity. Balko’s piece, however, has a better all around flow, organization and consistency. In Don’t Blame the Eater, David Zinczenko composes his opinion on the fast foodRead MoreNever Eat Alone1360 Words   |  6 PagesNeCaroline Madden Prep for Profession Jonathan Flom 18 March 2013 Never Eat Alone Never Eat Alone by Keith Ferrazzi is extremely applicable to the performing arts business. The book emphasizes on the importance of knowing your own brand, connecting with others, and relating to others on a human level. To be in the acting business, you need to know the package you are going to present yourself with, you need to be able to work well with others, and in the audition room make a human connectionRead MoreThe Problem With Obesity And Obesity995 Words   |  4 PagesHave you ever drank a pop or soda? I’m sure most people would answer yes to that question. But a better question is do you really know what is inside the can? Everything we put in our body effects us. From vegetables to doughnuts, everything carries nutritional facts with it. Some are better than others. But one thing is for sure; the nation is in a crisis with obesity. Weight gain is on a rise and more and more of the population is getting bigger and bigger. This can be credited to the nutritional

Human Factors in Organizational Design - MyAssignmenthelp.com

Question: Discuss about the Human Factors in Organizational Design. Answer: Introduction Health and safety regulations are necessary to make sure that every worker works in hazard-free environment. Workplace Health and Safety (WHS), which is often referred to as Occupational Health and Safety (OHS), is the set of regulations and assessment of the risks that may have impact on the health, safety and welfare of the people who work at different workplaces, effectively meaning every employee of the country (Australia, 2014). However, this act encompasses every stakeholder of any organisation and seeks to protect everyones health safety. Business owners and even government organisations are obligated to comply to some legal rules and regulations that are designed towards protecting the health and safety of the people who are involved with the organisation in any way. The following report would be looking into the current WHS conditions of BizOps and give comprehensive and realistic ideas relating to how can the current conditions be made to be better and the policies more integrated into the operations of the company. BizOps Enterprises is dedicated to ensure all of its employees with a safe and secured working environment. Every employee has to feel secured while working here and it is the duty of the organisation to do that. These policies are formed in accordance to the legislative obligations that the company has to the laws and WHS regulations of the state. As a demonstration to this commitment of the organisation, BizOps take prompt action against any and every unhealthy and unsafe working situations. All workers are trained about and communicated to regarding the health and safety practices and procedures of the company. The health and safety representatives of the organisation are selected and appointed according to the state and territorial legislations. These representatives have the authority that are vested by the state legislations. To ensure the workplace health and safety are of the highest standards, BizOps regularly consults on WHS with its staff and employee representatives and a lso, if deemed necessary, with the contractors and suppliers of the company as well. First aid attendant: The company has an attendant who is always on alert and any issue regarding any sort of injury or safety is immediately given attention by the attendant. The attendant is trained by the organisation themselves to equip the personnel with the knowledge and skills to tackle any unpredicted situation that may arise. Emergency evacuation procedure: The company has clear escape plans and routes all over the building and clear directions about the escape routes are put up on the walls of BizOps. This make it easier for the staff to evacuate quicker and calm manner without causing panic. WHS audit: BizOps conducts regular internal audits of its WHS policies to ensure that the procedure and policies are up to the mark and can face adversities in any case. The audits help the organisation to understand if any upgradations are needed or any modifications are required to the existing policies. The organisation also has strict policies regarding reporting of any hazards or incidents that pose to be a threat to or compromise the WHS of BizOps. The entire building is smoke free and fire and smoke detectors are installed everywhere that ensure no fire related hazards happen. BizOps has a WHS policy that adheres to the state legislations and conforms with the laws of the country. However, the existing policies can still be enhanced and a better policy can be adopted. To achieve this, the company has to analyse all aspects and have proper ideas relating to the scope and framework of the issues that may arise. It should be clearly defined what are the responsibilities of the company and how can those be achieved and which strategies may facilitate in this process. The organisation also has tables and charts that segregate and classify every possible type of hazard that may happen in the workplace and also how can they be prevented or tackled. While investigating the past WHS incidents of BizOps, it has been noticed that the staff and employees are almost never consulted about hazard identification or assessment. Their suggestions about forming and developing risk controls are also not taken into account. Moreover, some information is given only to the employees, making it difficult for the work students and interns to know about them and take precautions. BizOps has to come up with a system that would be helpful in making more decisions, where the staff and every employee would be consulted to form the risk assessment and risk control structures. The staff should be consulted and their suggestions and inputs have to considered while forming the new policies of the company. In recent times, BizOps had to grant two employees work offs because they had sustained injuries at the wotrkplace. One was due to prolonged sitting at the computer because the employee was tasked with data entry into the computer, and the other was suffered by a work experience student who had injured her lower back while lifting goods in the warehouse. The two incidents that were recorded in the last months are the two key points that would serve as the basis of the formation of the new policies. These employees are going to be consulted as they would be the best to depict the scenario that happened and can also help to understand what could have been done to prevent them. The suggestions that would be given by these employees would serve as the key components for the new policy outlines. Summary of the key points The specific conditions and situations of the incidents have been recorded and the suggestions and perspectives of these staff have also have been noted down. The WHS policy of BizOps are being overviewed and the occurred instances and the prevailing policies are being compared to understand the discrepancies and gaps that led these to happen in the first place. The new policies should be made and formed after the staff of the organisation are consulted, because they are the persons who face the situations that have potentials for safety hazards. Hence, they would be the most knowledgeable about what are the causes or which things lead to the safety issues. Involving them and consulting the employees would be the best way to create the new WHS policy for BizOps. Hazard report number 1 Area of work Data Entry Date Specific hazard location Data entry desk Reported by Contact phone number Contact email Hazard description: Risk likelihood legend Grade Level of likelihood A Expected (will occur regularly) B Probable (will occur at some stage) C Possible (could occur) D Improbable (could occur but unlikely) E Rare (may occur but in limited situations) Risk impact/ consequence legend Grade Level of impact 1 Insignificant 2 Minor 3 Moderate 4 Major 5 Catastrophic Risk categorisation matrix Level of likelihood Level of impact 1 (Insignificant) 2 (Minor) 3 (Moderate) 4 (Major) 5 (Catastrophic) A (Expected) Medium Medium High Extreme Extreme B (Probable) Medium Medium Medium High Extreme C (Possible) Low Medium Medium High High D (Improbable) Low Low Medium Medium High E (Rare) Low Low Low High Medium Suggested controls: The employee was immediately taken to a doctor, for which the organisation paid. The company also sanctioned for a long leave for the employee to help him recover from the injury sustained Recommended control(s): The employee must first be allowed to treat himself to recover from the injury. That is the foremost priority. The employee should be given the time to regain his strength. The employee should be consulted about what he thinks happened and why did he injure himself The employee must be asked about his ideas and suggestions regarding what could have been done to prevent this situation The new policies can use his suggestions and inputs to form the strategies that can aid in situations like this in the future as well as plans to reduce the possibilities for the occurrence of these situations Person responsible Controls to be completed by: Approved by organisational unit head/officer Completion verified by health and safety representative (HSR) Appropriate training program Based on the risks that relate to computer data operators, BizOps has decided to train all the other operators regarding how to work in a manner that would not cause any such incidents in the future. The operators would be given proper ideas regarding how should they sit and even operate in the office. What should be the right thing to do when an employee feels uncomfortable after working for a long period of time. The computer data entry operators would be given ideas about how can they reduce their own physical pain by using certain techniques. Despite a lot attention being given to the employee safety in BizOps, the focus on the safety of the work experience students is still very low. This needs to be given attention and policies need to be made that would also make the organisation a safe place for the students who come here to gain knowledge. A work experience student injured her lower back from having to shift goods in the warehouse. This cannot be tolerated if the company looks to make it a good and safe working place. The company wishes to change its current condition and make it a point to ensure safety and health security to all of the people involved, including the students who work here for experience. In order to achieve this, BizOps has to train the work experience students and let them know how to use the handbook and the guidelines, so that they can better avoid the situations that can lead to hazardous situations. They also have to trained regarding equipment handling and other potentially hazardous work they execute. Accident at the warehouse Details of incident (e.g. to a worker or visitor) and treatment Date of incident Time of incident Nature of incident Near miss First aid Medical treatment/doctor Name of injured person Mary Smith Activity in which person was engaged at the time of the incident/injury Mary was checking her phone and tripped over a box of documents Exact site location where incident/injury occurred Warehouse Nature of injury, e.g. burn, fracture, sprain Ankle sprain, bumped her head Specific location of injury on body, e.g. upper left arm Ankle, head Treatment given on site First aid, bandage Name of treating person Witnesses to incident Name Phone contact Name Phone contact Description of incident Mary Smith was walking while checking her phone and did not notice the box of documents next to the filling cabinet. She tripped over and sprained her ankle and bumped her head. Immediate response actions (e.g. barricades, isolation of power) to stabilise the situation She was given first aid in the warehouse itself by the first aid attendant. Then she was taken to a local hospital and was given two days off from work. Person reporting Signature Reported to Name Position Name Position Conclusion From the above recommendations and hazard analysis of BizOps, it is evident that the company is on the right way to resolve the issues it has been facing regarding the health and safety issue, in the recent times. BizOps will be changing a lot of its operational policies to make sure that the new WHS policy of the company is more inclusive and gives the employees even more health security, making the company a much safer and secure place to work at. References and bibliography Australia, S. W. (2014). Model Work Health and Safety Regulations 2011.Division 2High Risk Construction WorkSafe Work Method Statements. Australia, S. W. (2014). Work-related traumatic injury fatalities, Australia 2013.ACT: Canberra. Australia, S. W. (2015). Exposure to Multiple Hazards Among Australian Workers.Safe Work Australia, Canberra. Baicker, K., Cutler, D., Song, Z. (2017). Workplace wellness programs can generate savings.Health affairs. Blewett, V., Rainbird, S., Clarkson, L., Etherton, H., Paterson, J. (2014). Strategic engagement: including youth in the development of the Youth Work Health and Safety Strategy for South Australia. InHuman Factors in Organizational Design and Management XI: Nordic Ergonomics Society Annual Conference Proceedings(pp. 711-716). Chan-Mok, J. O., Caponecchia, C., Winder, C. (2014). The concept of workplace bullying: Implications from Australian workplace health and safety law.Psychiatry, Psychology and Law,21(3), 442-456. Chmiel, N., Fraccaroli, F., Sverke, M. (Eds.). (2017).An Introduction to Work and Organizational Psychology: An International Perspective. John Wiley Sons. Dawkins, S., Sanderson, K. (2017). Workplace mental health: An international review of guidelines. Dollard, M. F., Bailey, T. S. (Eds.). (2014).The Australian Workplace Barometer: Psychosocial safety climate and working conditions in Australia. Australian Academic Press. Lay, A. M., Saunders, R., Lifshen, M., Breslin, F. C., LaMontagne, A. D., Tompa, E., Smith, P. M. (2017). The relationship between occupational health and safety vulnerability and workplace injury.Safety science,94, 85-93.

Express Trusts free essay sample

Declaration – where a title holder expresses his or hers intention to hold their property on trust for another. 2)Transfer where title is transferred to a person with instructions that it be held on trust for another. -inter vivos ? occurs during the life of the person (referred to as a ‘settlement’). It may be for consideration or a gift. (NB: Equitable Assignment check list). -post mortem ? occurs after the death of the person (in their will). 3)Direction – where a beneficiary instructs their trustee to hold an interest on trust for another person. Kinds of Trust Trusts are either: 1. Express Trusts (being examined in this lecture). 2. Charitable Trusts 3. Resulting Trusts (intention presumed) 4. Constructive Trusts (used as a remedy) Three Certainties The law of equity states that a trust must satisfy the 3 certainties. If any of the 3 certainties do not eventuate, the trust will fail: ?Certainty of Intention – it must be clear that the settlor or testator/testatrix (person creating a trust) wanted the trust to exist. We will write a custom essay sample on Express Trusts or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page ?Resulting (intention presumed) and Constructive (used as a remedy) trusts are immune from this certainty. Intention does NOT need to be expressed through the word ‘trust’. Only the elements of a trust need to be present. Commissioner of Stamp Duties v Joliffe (1920) 28 CLR 178 -At this stage Qld law stated that a person could only have 1 bank account. -Joliffe set up a 2nd bank account, as a ‘trust account’ for his wife. -When Joliffe’s wife died, death taxes/duties were owed on the account. -Joliffe went to court and argued that he lied and wasn’t actually holding the account on trust for his wife – it was for him. HC agreed with Joliffe. -Rule: If it is possible for the creator of the trust to display to the court that he never/did intend for a trust to exist, the presence or absence of the words ‘trust’ or ‘trustee’ is irrelevant. -Clean Hands: There appears to be an issue here of equity’s requirement that all parties relying on equity have ‘clean’ hands (issue seemed to have been ignored here). -Evidence: Burden of proof will fall on whoever wants to prove a trust is in existence. ~Inter vivos trust? ritten evidence or oral evidence will be accepted. Factors that will be important in determining whether or not a quistclose trust exists include: (a) the presence of a separate bank account and; (b) letters indicating intention. Barclays Bank Ltd v Quistclose Investments Ltd [1970] was incorporated into Australia law through Classifying the Quistclose Trust: ?QC paid the money to RR, who is the beneficiary? ? must be shareholders? Hence if RR liquidates, than money should go to shareholders, not QC. ?Ford Lee ? mutual intention in Quistclose was that if company was an ongoing concern, dividends should be paid. If you examine judgment in Quistclose there is no mention of such a condition. ?Camerson Stewart’s argument in RSL ? the creditors in Quistclose don’t receive any beneficial interest (based on Justice Brighton’s argument in Mercantile Mutual v Farrington 1996). ?Twinsectra ? case in House of Lords, rejected the concept of a trust with two limbs. -It removed Quistclose Trust from the category of express tr usts all together. Travel agency was collecting airfare bookings and passing airfare funds onto airline. When travel agency went broke, the airlines argued that the funds held by the travel agency, were held on trust for the airline. -NSW Court of Appeal found there was a trust of the funds in question. -Problem: Customers of the airline had no intention of creating a trust. However this was deemed irrelevant as the contractual agreement between the airline and the travel agency had created an express trust for the funds. Issue in both Re Kayford Ltd (in liq) and Stephens ? The certainty of intention element was violated as these cases basically state that it’s not necessary for the settlor (testator/testatrix) to provide intention.